Skip to main content Skip to navigation
How To Wash
7 min read

Air-Drying Clothes Indoors: What the Label and the Room Decide

The care label sets the drying method; the room's humidity decides whether to keep going, change the set-up or stop. Our rules, from GINETEX, FTC and EPA.

Reviewed by the Launderwise editorial team Part of our drying and ironing guide
Editorial standards
Our room rule, read from the top: mould, mould odour or condensation that returns after a change means stop; condensation or a reading of 60% or more means change the set-up; below 60% with none of these means keep going

Disclosure: Some product links are affiliate links; we may earn a commission if you buy through them.

Dry each item the way its care label says, and let the room decide only where and whether it dries. The label’s drying symbol or wording sets the method: hang, drip, flat, in the shade or reshaped to size. The room is read on a humidity meter and on its windows, walls and pipes: the US EPA says to keep indoor humidity below 60%, ideally 30-50%, if possible, and that condensation can be a sign of high humidity. The two tables below cover each decision.

First, the label: find the drying symbol or the US wording and note the method. Then the meter: read the room’s relative humidity on an indoor hygrometer↗ before you hang the load. Then the room itself: check windows, walls and pipes for condensation and surfaces for mould. The room table turns those readings into a call.

Decision 1: the drying method on the label

GINETEX says the square is the symbol of the drying process and that line(s) inside it mean natural drying after washing (GINETEX brochure (external link)). Horizontal or vertical lines mean line drying, drip line drying, flat drying or drip flat drying, and an oblique line means that method is carried out in the shade (GINETEX (external link)). The GINETEX web page and symbol table are undated and were read on 18 November 2026; the brochure PDF was created in July 2017. GINETEX’s own symbol table shows how each one is drawn (GINETEX table (external link)):

The eight natural-drying symbols: how GINETEX's table draws each one, and the example GINETEX gives
The eight natural-drying symbols: how GINETEX's table draws each one, and the example GINETEX gives
GINETEX symbolHow GINETEX's table draws itGINETEX's example
Line dryingOne vertical line inside the squareAll colourfast textiles
Drip line dryingTwo vertical linesColourfast, large textiles to dry them without wrinkles
Flat dryingOne horizontal lineHeavy, colourfast textiles
Drip flat dryingTwo horizontal linesColourfast but delicate textiles
Line drying in the shadeOne vertical line, plus an oblique line across the top-left cornerTextiles which are not colourfast (silk)
Drip line drying in the shadeTwo vertical lines, plus the oblique lineDelicate textiles like silk
Flat drying in the shadeOne horizontal line, plus the oblique lineWoolen or delicate textiles
Drip flat drying in the shadeTwo horizontal lines, plus the oblique lineWoolen jackets

The examples are GINETEX’s examples, not complete lists of the fabrics each method suits. The other drying and ironing guides are gathered on our drying and ironing hub. Our glossary shows the pictures for line drying, drip drying, flat drying and drying in the shade.

GINETEX says a label gives the most severe treatment that does not cause irreversible damage to the article, and that milder treatments and lower temperatures are always allowed. Neither GINETEX document read for this page ranks the natural-drying methods against one another, so this page does not either: dry the way the symbol shows. When a label has no tumble dry symbol, GINETEX says the washing and ironing symbols give indications as to drying. Our rule for a label with no drying instruction at all: read its other symbols in the care-symbol decoder before you choose a method.

The words on a US label

The glossary of the US Care Labeling Rule defines these drying terms (16 CFR 423, Appendix A (external link), as amended to 2 August 2000):

Drying words on a US care label and what the Care Labeling Rule glossary says they mean
Drying words on a US care label and what the Care Labeling Rule glossary says they mean
Words on the labelWhat the glossary says they mean
Drip dryHang dripping wet, with or without hand shaping and smoothing
Line dryHang damp from a line or bar, in or out of doors
Line dry in shadeDry away from sun
Line dry away from heatDry away from heat
Dry flatLay out horizontally for drying
Block to dryReshape to original dimensions while drying

These are a second vocabulary, not translations of the GINETEX symbols, and this page does not treat one as the other. Indoors, “dry away from sun” means away from a sunny window, and “drip dry” means the item goes on the rack dripping wet, so it gets no extra spin.

Wool: flat unless the label says otherwise

The Woolmark Company recommends drying wool garments, particularly knitwear such as sweaters, flat, unless the care claim says they can be tumble dried. It says line drying or drying on hangers can make knitted wool garments stretch, while wool wovenwear such as tailored suit pants or jackets can be hung on a hanger and dried out of direct sunlight. When drying wool, it says to avoid direct sunlight, magnified sunlight close to an outside window, or direct heat, and not to put a wool garment over a radiator (Woolmark (external link), an undated page read on 18 November 2026).

Two mistakes follow from that: hanging a wool knit to save rack space, and putting a rack of wool against a radiator to speed it up. Washing the sweater comes first; the steps are in how to wash a wool sweater without shrinking it. A suit is washed only when its label allows it: how to wash a suit reads “Dryclean Only” or a crossed-out wash tub as no washing, and dries the jacket on a hanger with wide curved ends, never in a tumble dryer.

Decision 2: keep going, change the set-up or stop

UK government guidance for rented-housing providers in England names drying laundry, with showering and cooking, as a normal activity whose moisture builds up in the air around a home if it cannot be removed (GOV.UK (external link)). The EPA says relative humidity can be measured with a moisture or humidity meter (EPA (external link)). Read the meter and look at the room, then take the first row below that matches:

The room decision, read from the top: the first row that matches is the call
The room decision, read from the top: the first row that matches is the call
What you find in the roomOur callWhat the guidance says
Visible mould, or a mould odour, in the roomStop drying laundry in that roomGOV.UK guidance for rented-housing providers in England: visible mould, mould odour or water damage, including condensation, is enough to indicate the need to remedy the issue
Condensation that comes back after you changed the set-upStop drying laundry in that roomEPA: condensation can be a sign of high humidity; dry the wet surface quickly and reduce the moisture source
Condensation appears on windows, walls or pipesChange the set-up (list below)EPA: act quickly to dry the wet surface and reduce the moisture source
The meter reads 60% or moreChange the set-up (list below)EPA: keep indoor humidity below 60%, if possible; CSE: risk of mould growth above 60%. Counting 60% itself is our choice
The meter reads below 60%, with no condensationKeep goingInside EPA's below-60% advice; CSE's range is 40-60%
No meter in the roomStart with the inside door closed and a window open, or a dehumidifier in the closed room, and watch for condensationEPA: relative humidity can be measured with a moisture or humidity meter

Because the table is read from the top, a room under 60% with mould on a wall is a stop. The stop call and the 60% trigger are our rules; the right-hand column is what they rest on.

Read the percentage the meter shows against the table: the listing of the model linked here gives no humidity range for drying laundry, so its comfort-level icon is not the trigger this page uses.

After a change, read the meter again before the next load. If it still reads 60% or more with the new set-up running, move to the next option in the list below. When none is left, our rule treats the room as a stop: the next load waits until the meter reads below 60%. No source we read says what to do with a load already on the rack in that case; CSE’s finish test still applies before it goes into a wardrobe or drawer.

Changing the set-up, in this order

The Centre for Sustainable Energy (CSE), a UK charity, says to avoid drying laundry inside if you can (CSE (external link)), and a Manchester NHS trust leaflet says to try not to (Manchester University NHS Foundation Trust (external link)). When you have to, our order is below. For a load already on the rack, decide item by item: a second spin or the tumble dryer only for the items whose label allows it, and an item you move keeps the flat or shade drying its label gives.

  1. A second spin, where the label allows spinning: CSE and the NHS leaflet both say to run the washing machine’s spin cycle twice. Items labelled drip dry are the exception, since the US glossary says to hang them dripping wet.
  2. A room with the inside door closed and a window open: CSE and the NHS leaflet both describe this set-up. The EPA also says to open windows when practical and to use fans as needed.
  3. A dehumidifier set under 60% if possible, with that room’s doors and windows closed: CSE says it works more efficiently that way, and that on warm, dry days an open window is just as effective. The EPA says to use dehumidifiers when needed.
  4. Outdoors, where possible: the GOV.UK guidance lists drying laundry outdoors among its advice.
  5. A tumble dryer, only where the item’s care label allows tumble drying; a label that allows only natural drying rules this option out. The EPA says to vent appliances that produce moisture, such as clothes dryers, to the outside where possible.

Where the humidity figures differ

The two agencies read for this page do not give the same kind of range:

Indoor relative humidity: the range each source gives
Indoor relative humidity: the range each source gives
SourceRange it givesAbove 60%
US EPA, Brief Guide to MoldBelow 60%, ideally 30-50%, if possibleOutside its range
US EPA, Mold Course Chapter 2Below 60%, ideally 30-50%, if possibleOutside its range
CSE (UK charity)Between 40% and 60%A risk of mould growth

The EPA gives the same line on both of its pages (EPA Mold Course (external link)): stay below 60%, with 30-50% as its ideal. CSE gives 40-60% as its range and places the risk of mould growth above 60%. Exactly 60% is inside CSE’s range and outside EPA’s, and neither source gives a figure written for laundry. Our rule counts 60% itself as the point to change the set-up, so the page follows the stricter of the two. At the bottom, a reading from 30% to under 40% sits inside EPA’s ideal but below CSE’s range; neither source ties a low reading to drying laundry, so this page sets no lower limit.

What this page does not give

No source we read gives a time for drying laundry indoors without heat, so this page gives none. The finish test is CSE’s: make sure clothes are completely dry before putting them in wardrobes and drawers.

The EPA’s Brief Guide to Mold (updated 18 February 2026) says molds have the potential to cause health problems, and that research on mold and health effects is ongoing. This page makes no health promise for any drying method. A musty smell on the laundry itself is a different problem from mould in the room; the fixes are in how to get a smell out of clothes.

Bottom line

Before the next load, check the drying symbol or wording on the items that matter most to you, and put a humidity meter↗ in the room you dry in. If that room keeps reading 60% or more and the label allows tumbling, which fabrics can go in the tumble dryer is the next page to read.

Independent editorial note

Launderwise is an independent laundry and fabric-care publication. We compare products and methods by evidence, practical fit and reader value, and we call out the trade-offs before recommending a route.